Best Way to Remove a Stripped Screw

Have you ever tried to dismantle something and as you remove the screws one of them suddenly strips? This is certainly can be a disappointing experience. Searching for a quick solution? Below is a list of 12 methods that can help you unscrew the stripped screw. Pick the simplest method that best suits your circumstances!

Twelve Ways to Remove a Stripped Screw

1. Easy-out Screw Extractor Method

Easy-out screw extractor is the most efficient method and it gets the job done quickly with minimal effort. These extractors are considerably cheap and will make the task very easy in addition to saving time.

2. Notch Method

In this method, you first create a notch at the top of the screw using a tool such as a Dremel. You will then place your flat head screwdriver in the notch and attempt to loosen the screw.

3. Hole Drilling Method

Are you skilled at drilling? If yes, you can use a drill to make a tiny hole at the middle of the screw. Just drill a tiny hole such that your cross head screwdriver can reach the bottom and enhance its grip as you twist it.

4. Welding Adhesive (JB Weld) Method

You can use super strong welding adhesives such as JB Weld to append a nut tightly to the top of the screw. Ensure that you use a nut that is relatively similar in size to the head of the screw or a nut whose hole diameter is slightly small compared to the hole diameter of the screw.

Position the nut directly above the screw and then cautiously spread JB Weld around to avoid spreading it all over. In case the nut is not even with the screw, you will have to first seal the edges using a temporary gasket that dries rapidly such that the adhesive remains in the hole.

Allow the adhesive to dry for the time suggested by the manufacturer. After it becomes firm, loosen the screw with the help of the appended nut using a socket wrench.

5. Rubberband method

If you are skilled in the use of rubber band, position the rubber band over the screw’s head and apply immense pressure as you attempt to loosen the screw. The rubber can help create the additional grip necessary to loosen the screw.

6. Fittingly sized flat head screwdriver method

This method is very simple although it is only reliable if it’s a cross head screw and particularly Phillips. You can try to loosen the screw by using a fitting flat head screwdriver and applying as much pressure as possible. In most cases, a fitting flat-head screwdriver will have a lot of grip when used on a stripped screw. If this method is not effective, it can be combined with #5 (rubber band method).

7. Slightly Bigger Phillips Screw Driver Method

This is also a rather simple method. Utilize a Phillips driver that is relatively bigger compared to the hole and press it firmly and tilt the screwdriver slightly and twist. This is often effective for slightly stripped screws.

8. Welding Method

If you are skilled at welding, position a nut above the screw and weld them together alongside the inner side of the nut. You can then go ahead and unscrew as indicated in #4 using a socket wrench.

9. Needle-Nose Clamping Pliers Method

In case you had partially unscrewed the screw such that the screw top is out in the open, you can try using either needle-nose clamping pliers or non-clamping needle-nose pliers. Needle-nose clamping pliers are quite effective in this case.

10. Drill Head Off Method

This is a fairly risky method which requires a lot of caution as you have to take out the screw’s head by drilling. Cautiously drill without going too deep such that you can take out the portion you intend to remove. After successfully drilling the head off and taking out the drilled part, a sufficient portion of the screw will be out in the open given that you didn’t drill excessively. You can comfortably use a needle-nose clamping pliers to take out the screw’s shaft.

11. Hammer and Screw Driver Method

If you’re working on a relatively strong thing, you can attempt to strike your screwdriver into the screw using a hammer. Given that the screw metal was soft to the extent that it stripped, there is a high probability that you will strike the screwdriver effectively into the screw and attain the necessary firmness for unscrewing. Evidently, this method cannot be relied on in the case of a fragile object.

12. The Hammer Method

If all the above listed methods have failed to work for you, you may just have to destroy the entire screw using a hammer. Assume that it’s unfortunate that the object will suffer collateral damage!

The post Best Way to Remove a Stripped Screw appeared first on Tools Bestseller.

What You Need to Know About the DeWalt DC012 Worksite Radio

As they say,  little music can change your workday. It can make the work day go by more quickly. That’s what every construction workers worker needs, a radio with a good sound and one that is rugged enough to stand the rigors of the job site. Since its inception, that’s been the purpose of the DeWalt DC012 Worksite Radio to provide entertainment and a charging device for multiple devices.

This cordless Worksite Radio device runs off of 12V to 18V DEWALT batteries and can charge 7.2V to 18V DEWALT battery packs (Except Univolt) in less than 1 hour.

DeWalt DC012 Worksite Radio also has a Three-Stage Charging System for Maximum Run Time and Battery Life which serve to keep you working without interruption. So you are guaranteed maximum run time and a machine with an overall battery life.

The device has an AM/FM Tuner with LCD and Maximum Bass and Range for Quality Sound so users get to enjoy a high-quality sound even if the job site is noisy.

Another great feature of the DC012 is that it allows you to connect an iPod or MP3 player to the worksite radio and listen to music at work.

Apart from construction workers, the DeWalt DC012 Worksite Radio is used by consumers outside the construction industry, in places such as beaches, yard work and during picnics. The radio is durable and does not easily break.

The DeWalt radio products have a Dewalt Tool Connect mobile app that allows a person to remotely control the state of charge, control how a lent battery pack can be used and the enabling and disabling of a battery pack. Can alert a person when the battery is fully charged or low charge.

The products have different limited warranty categories which include: a three-year limited warranty from the date of purchase that repair any defects and malfunctions, one-year free service contract and a 90-day money back guarantee.

Pros

The rugged design. It is very durable and water resistant

Great multifunctional radio. It can both charge and run off a battery.

Cons

Problem with the antenna. The tuning of this radio is not so good. The tuner knob does not last. There have been so many complains from users of the radio.

Problem with the Sound. The speakers are not that great, they don’t sound so good. Although it comes with a bass button, the speakers can’t handle it. Sorry, you have to turn the volume down or turn off the bass to reduce the amount of distortion.

Read This Before Buying the DeWalt DC012

Question: What is the power supply rating of this worksite Radio? Is it 110v or is it 110-240v?

Answer: Input is 120V at 60 Hz and 12 AMPS.

Question: Is a battery included when I buy this device? Does the battery last long?

Answer: No batteries are not included. The device is primarily a battery charger and radio. It is used for charging the DeWalt 18v tool batteries.  The radio will play without being plugged in. The device has three AC plugs in on the side so that if you have the radio plugged into a wall socket, you can also plug three other things into it.

Question:  Can the DeWalt DC012 charge the 18v lithium battery?

Yes, but it will charge one at a time. It would need to be plugged in for that.

What Are Other DeWalt Worksite Radio Charger Options to Consider

DeWalt DCR015

This Jobsite Radio is one of the most popular options now available on the market. Once the battery is fully charged, it can last for the entire workday.

It can also be used to charge your phone and if you get Dewalt Bluetooth adaptor upgrade, you can use this device to play music from your phone.

DEWALT DCR018

Another great option is the DCR018. This portable radio allows for quick and convenient use on and off the job site. The device can be powered by 18V NiCad, 18V lithium-ion, 12V MAX, or even the 20V MAX DEWALT batteries. This makes it compatible with most of DEWALT’s batteries.

The device comes with a digital tuner, bright backlit LCD display with clock, and five AM/FM presets. It also has a built-in device storage box that protects electronic devices from dust.

In this review, was about getting a clear insight of the DC012 Radio. We looked at its features, some pros, and cons of the device. We also saw other viable options to the DeWalt DC012.

The post What You Need to Know About the DeWalt DC012 Worksite Radio appeared first on Tools Bestseller.

A Beginners Guide to Charging Electric Vehicle

Just got your first electric vehicle? or maybe you are making plans for installing a charging station at your home. With so many charging devices available on the market, it becomes quite a challenging task to make a choice that best meets your needs. Just like you, I also had several questions about electric vehicles.

One important question I kept asking myself was, what’s the difference between an electric vehicle charger and a charging station? What is it about the different levels of charging? Why do I need to install a charging station?

Well, I conducted an extensive research and I am happy to share my findings with you.

What is an Electric Vehicle?

An electric vehicle is an automobile that is propelled by electric motors, using electrical energy stored in rechargeable batteries or any rechargeable storage device.

What is an Electric Vehicle Charger?

An electric vehicle charger is an equipment located onboard an electric vehicle that takes in an AC source and converts it to DC so your car battery can get charged.  Like most people, at first, I thought an EV charger was the same as an EV charging station.

What is an Electric Vehicle Charging Station or Electric Vehicle Charging Station (EVSE)?

This is a wall mounted box or the portable unit you carry in the trunk of your car that supplies 240 volts of electricity.  If you own an electric vehicle you might want to consider buying one. It helps to speed up the charging of your electric vehicle.

How To Charge Electric Car At Home

With a number of charging options now available nearly 95% of electric cars are charged at home. You may simply plug into a standard electrical outlet.

All electric cars come with an onboard charger, so all you need to do is use the charging cord that came with the car and connect to an electricity source.

This option can only take you for about 4 miles or driving range in one hour of charging. For a faster option, you may need an Electric Vehicle Service Equipment (EVSE).   An EVSE is a device which brings AC power to your car. The AC power is then turned into DC power using the car’s onboard charger.  There are several EVSE options on the market. This has been discussed in detail below.

1. You need a good outlet
2. You need a charging station or electric vehicle supply equipment ( EVSE)

Basic charging is through a 120-volt outlet- the standard household outlet, known as Level 1 charging.

If you want to know about Level 2 and Level 3 charging see below.

Level of Charging available

What type of station do I need? To answer this you first need to know how much charging you need.

These are the main charging level options available

Level 1

Level 1 charging equipment provides charging through a 120 V alternating-current (AC) and allows you to plug your car into an ordinary household outlet.

Level 1 charging device is standard as the majority of vehicles today come with a Level 1 cord set as a means of charging.  It is portable and doesn’t require the installation of charging equipment.

Depending on your Car and the size of your Car battery, it typically it takes 7-22 hours for a full charge using a level one charging.

You can get approximately 4.5 miles of range/hour when using the level 1 charging.

This means if you drive a lot in one day say 80 to 90 miles, it would take 18 hours to get a full charge. And for an average person who travels 40 miles per day, a 9-hour charging might just be enough for commuting the next day.

Level 1 charging is best suited for owner’s home in which case charging is typically conducted overnight.

Level 2

Level 2 supplies 240 V.  It allows for a wide range of charging speeds up to about 70 miles of range per hour of charging.  These stations by design can charge vehicles faster than Level 1.

It requires an installation of a charging equipment for use at home.

It also requires a dedicated 40 amp circuit.

The level 2 charging equipment is compatible with almost all electric vehicles and most Level 2 chargers come with a cord that plugs directly into the vehicle in the same connector location used for Level 1.

The Level 2 charging can take up to 4 to 6 hours to get a full charge. However, this depends on the battery technology used in the car.

Level 3

Level 3 charging doesn’t necessarily imply DC. It can be either AC or DC. It provides fast charging through a 480 V plug.

The level 3 charging equipment is not compatible with all vehicles, and the charge might not be accepted by all vehicles.

These type of charging provide an 80% charge in 30 minutes.

How long does it take to charge an electric car?

Charging times depend on the size of the car and type of battery.  Also, the type of outlet you’re using also determines the time it will take to charge your electric car.

EV batteries come in different sizes. Battery size refers to how powerful the battery is and not the physical dimension of the battery. There are no set standards connecting the battery size and range.

What affects the battery range is the car itself and your daily commute.  So it important you consider your lifestyle, daily commute and charging options to see what size works best for you.

Battery power is described in Kilowatt-hours (kWh).  The higher the kilowatt-hour number, the farther you can drive when on a full charge.

What are the Top 3 Best Electric Vehicle Charging Stations on The Market

1. ClipperCreek HCS-40
2. JuiceBox Pro 40
3. AeroVironment EV Charger

Tips on Choosing the Best Electric Vehicle Charging Station

There are few important criteria to consider that can help you make the best choice.

Cost

Price ranges from $400 to $700. You shouldn’t pay more than $1000 (doesn’t include installation cost). EV owners who wish to install Level 2 or Level 3 charging should expect to pay about $1500 for equipment and installation

Get a certified electrician to install your EVSE.

Amperage Capacity

It is important you know the level of electric current at which your vehicle charges. This is because it is not advisable to charge an electric vehicle above the charging capacity they are designed to handle. Be sure to check your vehicle’s owner’s manual to be certain of the max charge amperage for your vehicle.

Length of Charging Cable

When buying an electric station, you also want to take into consideration where this piece of equipment will be installed. Pick an ideal location and measure the distance between the charging port on your car and where the EVSE will be installed on your wall. Most cables that come with this equipment using run approximately 15 to 25 feet. You want to be certain that the cord is long enough and gives you enough flexibility just in case you choose to add another electric car in your garage.

Portability

You got to make up your mind if you want to go with a permanent installation option (hard-wire installation) or you want to have an electrician install an outlet. For those that don’t have a garage, the local code requires that you hard-wire the charging equipment.

Some EVSE manufactures have both options of the equipment and they cost the same. So whatever option you choose to go with just make sure you choose the right equipment.

You should just buy one of the ones that come with a plug on it. Clipper Creek has two different options to choose from. A 14-50 plug or a 6-50 plug. They’re also sold on Amazon.

Final Thoughts

It is true that the EVSE is an indispensable part of your electric vehicle. It gives you a whole new level of freedom and of cause relieve that you can always charge your car whenever you want.

Buy the best charging station you can afford, but before doing that, research on quality and added features. By doing this you will be able to get the advantage and benefit the charging station can provide.

You can browse through the EVSE reviews to help you get more informed choices on what the best electric vehicle charger available in the market. The information above is essential before purchasing an EVSE for your vehicle. Nevertheless, it is still your decision; whatever model you choose to go with and whatever your reason is much respected.

 

The post A Beginners Guide to Charging Electric Vehicle appeared first on Tools Bestseller.